If your iRobot roomba vacuum cleaner battery no longer has the same performance before it is possible that your problem has a solution without the need to change the Roomba vacuum battery.
iRobot Roomba 537 vacuum battery troubleshooting tips
- Make sure that the Roomba battery pins make good contact – Force them up with great care to unfold them a little bit and get the battery to do better contact. Sideburns more grades correspond to the poles of the battery and the smaller to the APS Advanced Power System, a temperature sensor that regulates the load that the robot performs on the drums. It is important that all pins make good contact.
- Clean thoroughly the roomba truck – Dirt accumulated on the roomba truck makes this need much more energy to operate. Loses efficiency and makes that the iRobot Roomba 630 vacuum battery last much less.
- Perform a iRobot Roomba vacuum cleaner battery reset – You turn on by pressing the “clean” button for your Roomba vacuum cleanr. Hold for 10 seconds the “spot” and “dock” which are located above and below the “clean” button buttons. Release the buttons at the same time and you’ll hear the typical sound of home of the Roomba. PON the Roomba recharge for at least 12 hours or until it is put into green “Clean” button.
Australia Power Tool Battery Resource 